SNL Series
All Nylon filter capsules are highly retentive,
naturally hydrophilic nylon membrane filters that have
been specially designed for liquid applications. The ny-
lon membrane in an all-nylon construction provides
excellent chemical compatibility and superior flow per
unit area as compared to other membrane capsules. No
adhesives, binders, or surfactants are used in the
manufacturing process. All capsules are rinsed with
high-purity water to reduce extractables and downtime.
The naturally hydrophilic nylon membrane does not re-
quire pre-wetting with IPA and flushing with DI water,
thereby eliminating a potential source of contamination
and hazardous waste.
All filter capsules are 100% integrity tested to ensure
filter performance each and every time out of the pack-
age. PureFlo nylon filter capsules are well-suited for
critical applications where superior flow and particle re-
moval efficiency at 0.05, 0.1, 0.2, 0.45, 0.65, and 1.0
micron is required.
SNV Series
All Nylon filter capsules are highly
retentive, naturally hydrophilic nylon membrane filters
that have been specially designed for liquid applica-
tions. The nylon membrane in an all-nylon construction
provides excellent chemical compatibility and superior
flow per unit area as compared to other membrane cap-
sules. No adhesives, binders, or surfactants are used in
the manufacturing process. All capsules are rinsed with
high-purity water to reduce extractables and downtime.
The SKN capsules were designed with built-in bleed
valves for simple and efficient evacuation of air and liq-
uid from the upstream side. The naturally hydrophilic
nylon membrane does not require pre-wetting with IPA
and flushing with DI water, thereby eliminating a poten-
tial source of contamination and hazardous waste.
All filter capsules are 100% integrity tested to ensure
filter performance each and every time out of the pack-
age. PureFlo nylon filter capsules are well-suited for
critical applications where superior flow and particle re-
moval efficiency at 0.05, 0.1, 0.2, 0.45, 0.65, and 1.0
micron is required.